Card Reader Touch Keypad ACRDR-2LKC-Professional Series 13.56MHz

Card Reader Touch Keypad ACRDR-2LKC-Professional Series 13.56MHz

Professional Series 13.56MHz Card Reader / Touch Keypad  SKU: ACRDR-2LKC




The ACRDR-2LKC is a professional access control reader, capable of granting access via RFID card and touch keypad.


Product features:
• Compatible with 13.56MHz access control systems
• Gain access via RFID card and keycode
• Use with Door Access Control series for multiple units
• Connect and configure with PC via ethernet cable
• RS485 and Wiegand 26/34 protocol
• Elegant, glossy black finish for professional appearance
• Tamper switch triggers loud alarm, deterring removal
• Blue backlight for low light visibility

Specifications

General
Product
RFID Reader / Large Touch Keypad
Main Processor
8 Bit
Communication
RS485 / Wiegand 26/34
Access
RFID Format
13.56MHz
RFID Read Range
≤8cm
RFID Read Time
<0.1s
Fingerprint Scan
N/A
Keypad
12 Touch Keys (0-9, *, #)
Function
Audio
Buzzer
Light
Blue Backlight
Tamper Switch
Yes
Environment
Ingress Protection
IP55
Vandal Protection
N/A
Power Supply
9~15 VDC / 100mA
Operating Conditions
-30°~+60° C / Less than 95% RH
Dimensions
135 x 86 x 12mm
Net Weight
0.25kg
Warranty (Years)
4

Shipping Weight and Dimensions includes product packaging

Width
120 mm
Height
55 mm
Depth
180 mm
Weight
0.25 kg



Suggested Products


ACENR-2C
Professional Series USB Card/Tag Enroller

13.56MHz NFC Proximity Keyfobs (NTAG215)
ACKEY104
13.56MHz NFC Proximity Keyfobs (NTAG215)

13.56MHz NFC Thin Proximity Cards (10 Pack)
 ACKEY103
13.56MHz NFC Thin Proximity Cards (10 Pack)

  
 KB has attchment VIP
Vision Access Control User Manual vQ121 (PDF)

available downloads
    VIP Vision ACRDR-2 Series Datasheet (PDF)
VIP Vision Access Control User Manual vQ121 (PDF)
SmartPSS for Access Control (Windows 2.002 2019-02-25)
ConfigTool for Intercom, CCTV & Access Control (Windows 2020-10-22)
Data Files

    • Related Articles

    • SD/TF card not locking in place

      If your SD/TF card is not clicking and locking in place then you can check the following things: 1. Is the SD/TF card in the right way? 2. Is the SD/TF card damaged or worn where the cutout notch is on the side? (this is what locks in place) 3. Check ...

    • HOW IS THE VIDEO FOOTAGE STORED ON SOLAR CAMERAS?

      You can use Cloud Storage or store the video to an SD card (up to 128GB). This will save the video footage to the SD card for you to view later on after the event has happened.

    • QF280 Solar and Battery Powered Security Surveillance Camera – PTZ WiFi camera with 8W solar panel

      Please watch this video that shows you the correct way to set up your camera on the Ubox or I-Cam+ apps. This video goes over some in-depth settings that will fix most problems and troubleshooting if the camera doesn't perform the way you want it ...

    • Security & Risk Assessment (Onsite)

      Security & Risk Assessment (Onsite)180AUD|1 hrIf you require professional and licensed security advice to ensure you have the right security products/services to meet your insurance & Workplace Health and Safety requirements then we recommend this ...

    • How do solar powered cameras work?

      The security camera is powered by lithium batteries. The lithium batteries are charged by the solar panel which is charged from the sun. The security camera has a motion sensor which activates the recording to store on the cloud or SD card. The ...